Mc Ju60 Bass 2 by Michał Cacko
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 57% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 80.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 2.61dB (207) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Oscillators ranges timbre
Oscillators 1 range is 8'.
Oscillators 2 range is 4'.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 230.27Hz (65) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 146.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 101.
Filter resonance is statically set to 39% (101).
Tuning pitch
Patch Mc Ju60 Bass 2 is transposed by -12 semitones.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.
Reverse Reverb fx
not yet complete
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 101 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 146 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.29s (50) |
| VCA Envelope Sustain Level | 27% (69) |
| VCA Envelope Release Time | 0s (0) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 121 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 146 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.59s (91) |
| VCF Envelope Sustain Level | 27% (70) |
| VCF Envelope Release Time | 0s (0) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |